Go To The Start Of The Current Incident; Go To The End Of The Current Incident - Videoswitch VDM-9G160 User Manual

Videoswitch
INCIDENTS
To exit without replaying an event, press the event key
*If the selected incident is too old and has therefore been over-written on the hard drive(s), it will not be
possible to re-play it.
7.8.2

Go to the start of the current incident

You must already be in play mode for these operations.
ALT and
7.8.3

Go to the end of the current incident

ALT and
Vdm601t.doc
If you wish to play back images from the date and time of
the selected incident* press one of the PLAY keys.
If you are within an incident, the incident number will be
displayed in the top, centre of the screen. Press ALT and
go to the start of this incident.
If you are within an incident, the incident number will be
displayed in the top, centre of the screen. Press ALT and
go to the end of this incident.
VDM Digital Recorder
to
to
25