9-Way And 16-Way Multi-Screen; Zoom; Auto-Sequencing; Auto-Sequencing Main Monitor - Videoswitch VDM-9G160 User Manual

Vdm digital recorder
Hide thumbs Also See for VDM-9G160:
Table of Contents

Advertisement

Videoswitch
6.2.5

9-way and 16-way Multi-Screen

If you have a VDM-9 or VDM-16, press multi-screen key to view nine pictures at once on the
screen. If you have a VDM-16, press multi-screen key again to view sixteen pictures at once on the
screen.
6.2.6

Zoom

To magnify a full-screen live image, you must enter LIVE mode (section 6.1) then:
ALT
and
Use the cursor keys to move around the image to see the magnified part that you
require
To exit zoom mode, press the ALT and
6.3

Auto-Sequencing

6.3.1

Auto-Sequencing Main Monitor

ALT
and
The auto-sequence symbol
enabled.
If a PIP image is being displayed, the main image will normally be sequenced. You may alternatively specify
sequencing of the PIP via the SETUP menus (SETUP/Display/PIP mode).
If quads are being displayed and there are more than four cameras installed, selecting auto-sequence will
cause the quads to sequence.
You may specify that only some of the cameras are to be included in the sequence. Refer to the SETUP
menu (SETUP/ User Menu /Auto Sequence (Main)/Camera List).
You may also specify the dwell time on each camera (SETUP/Display/Auto Sequence (Main)/Dwell Times).
6.3.2

Auto-Sequencing Spot Monitor

ALT
and
The auto-sequence symbol
is enabled.
You may specify that only some of the cameras are to be included in the sequence. Refer to the SETUP
menu (SETUP/User Menu/Auto Sequence (Spot)/Camera List).
You may also specify the dwell time on each camera (SETUP/Display/Auto Sequence (Spot)/Dwell Times).
Vdm601t.doc
Press the ALT key and the ZOOM key to enter zoom mode.
key again.
Select auto-sequencing on the main monitor to by pressing the ALT and the
keys. Auto sequencing is cancelled by pressing these two keys again, or by
pressing any camera select key.
is displayed at the top of the screen on the main monitor when sequencing is
Select auto-sequencing on the spot monitor to by pressing the ALT and the
keys.
Auto sequencing is cancelled by pressing these two keys again.
is displayed at the top of the screen on the main monitor when sequencing
VDM Digital Recorder
20

Advertisement

Table of Contents
loading

Table of Contents