Table of Contents
Advertisement
PLFRESNEL1 MKII LED Luminaires
BEAM ADJUSTMENTS
1. Beam Adjustments
To adjust the beam on the :
Step 1. As shown in Figure 7, loosen Beam Adjustment Knob
Step 2. Slide beam adjustment back (for spot) or forward (for flood) as desired.
Step 3. Hand-tighten Beam Adjustment Knob to lock position.
2. Barndoor Assembly
Philips Selecon offers as an optional accessory, a four-leaf barndoor assembly. This assembly is sold separately and
available from your Authorized Philips Selecon Authorized Dealer. For information on all available accessories for
the PLFRESNEL1 MKII LED Luminaire, refer to
Figure 7: Zoom and Focus Adjustment Knobs
"Accessories" on page
Installation & User's Manual
Beam Adjustment Knob
Spot
Flood
4.
Beam Adjustments
11
Advertisement
Table of Contents
