Operation Panel
Temp Setting
For washing, cold water can be mixed with
hot water. Press the button to select Hot/
Warm. (P. 8)
Do not use water hotter than 60 °C.
● The estimated water temperature in the
tub during wash process (when hot water
is 50 ºC, and cold water is 20 ºC):
Hot
approx. 40 ºC
Warm
approx. 30 ºC
● Lamp indications
Lighting: Hot/Warm is set.
Flashing: Hot water is being supplied.
Off: Cold is set.
● Not available for the following programs:
Gentle Hand Wash, Delicate, Air Dry,
Tub Hygiene, Sweat, Sauces,
Collar/Cuff, Oil, Curry
• When flashing quickly (P. 16)
(Operation panel of
the NA-F65G7)
Reserve
Set the time to finish washing
(in hours).
e.g.) 8 hours later
● Setting range: 2 - 24 hours
later, in one-hour increments.
(3 - 24 hours later for the
Soak program)
● Not available for the
following programs:
Gentle Hand Wash, Delicate,
Air Dry, Tub Hygiene
4
Water level/
remaining time
Indicates the selected program (No.)
After starting operation, indicates
the water level according to the
amount of laundry.
Indicates the approximate
remaining time (min).
Start/Pause
Select [1] - [10]
Change process settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes. (P. 11)
Flashing
Lighting
(in progress)
● After starting operation,
you can change settings
only during wash process
by pressing "Start/Pause".
(The wash process setting
of the Stain Master program
cannot be changed.)
Water level/
water amounts
Water
Level
NA-F70H7
10
52 L
9
48 L
8
7
6
5
4
3
2
1
Child Lock lamp (P. 11)
Power On/Off
The power turns off
Select [11] - [15]
automatically if you do not
• Stain Master (P. 9)
press "Start"/"Pause" within
10 minutes after power-on.
Change water level
During the wash process,
press "Water Level" to
change the water level.
● Some water levels
cannot be selected
depending on the
program.
● Press "Water Level" to
check the water level.
Water amounts
NA-
NA-
F65G7
F62G7
F65H7
F62H7
48 L
46 L
44 L
42 L
39 L
37 L
35 L
32 L
31 L
29 L
20 L
ECONAVI lamp (P. 5)
Auto Restart lamp
In case of a power
failure during
operation, operation
will resume from the
point where it was
stopped when the
power is recovered.
The lamp lights up
when the operation
resumes.