Power light
Lamp light
Red
Off
Red
Flashing red
Light status
Flashing
varies
orange
Red
Off
Red or flashing
Flashing red
red
Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic:
Solving Problems
Related references
Projector Setup Settings - Extended Menu
Temperature
Status and solution
light
Red
Projector has overheated and turned off. Leave it
turned off to cool down for five minutes.
• Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby
objects.
• If operating the projector at high altitude, turn on
High Altitude Mode.
• If overheating continues, clean or replace the air
filter.
• If the problem persists, unplug the projector and
contact Epson for help.
Off
Lamp has a problem.
• Check to see if the lamp is burned out, broken,
or installed incorrectly. Reseat or replace the
lamp as necessary.
• If operating the projector at high altitude, turn on
High Altitude Mode.
• If the problem persists, unplug the projector and
contact Epson for help.
Off
Replace the lamp soon to avoid damage. Do not
continue using the projector.
Flashing red
A fan or sensor has a problem. Turn the projector
off, unplug it, and contact Epson for help.
Flashing red
Internal projector error. Turn the projector off,
unplug it, and contact Epson for help.
120