Epson PowerLite 1725 Quick Setup Manual page 3

3
I f your projector and notebook don't display an image, do
the following:
Windows: Hold down the Fn button on the keyboard and press the
CRT/LCD or
Display in the Windows Control Panel. In Windows Vista
on the desktop and select Personalize, then select Display Settings.
Make sure both the LCD screen and monitor port are enabled. See your
Windows online help for details.
Mac OS ® X:
then click Display or Displays. Click Detect Display. Select the VGA
Display or Color LCD dialog box, click the Arrangement (or Arrange)
tab, and make sure Mirror Displays is checked.
If projecting wirelessly...
Follow the steps in this section to project over an 802.11g, 802.11b, or
802.11a wireless network from a computer running Windows 2000, XP,
or Windows Vista, or Mac OS X 10.3 or later. Your computer must have a
wireless card or built-in wireless interface.
Y ou can also project wirelessly by using the Network Projector
function in Windows Vista. See the User's Guide for instructions.
1
T urn the projector over and unscrew the
wireless module cover.
2
Remove the wireless module cover.
3
I nstall the wireless LAN module.
Then replace the cover and screw.
4
T urn on the projector and adjust
the image as described in sections
1 and 2 on the front of this sheet.
5
D o one of the following:
•
T o use Quick Wireless Connection, follow the steps below
(Windows only).
•
T o use EasyMP
6
C onnect the USB key (located in a
pocket inside the projector's case) to
the projector's
USB port.
7
W hen you see a projected message
that the network information update
is complete, remove the USB key.
8
C onnect the USB key to a USB port on your Windows computer
or notebook.
I f you see the AutoPlay window in Windows Vista, select
Run Launch U3.exe. Then select Allow.
9
W hen you see a license agreement, click Agree to install the Quick
Wireless Connection driver. If you see a Firewall message, select Yes
to disable the Firewall. After a few moments, your computer display is
projected. If not, restart your computer.
10
W hen you're done with your presentation, remove the USB key.
function key. If this doesn't work, double-click
From the Apple
®
, see "Using EasyMP" (Windows and Mac OS).
®
Type A (flat)
menu, select System Preferences,
, right-click
®