Download Print this page

saro CB-20A User Manual

Built-in induction cooking unit

Advertisement

Quick Links

Model No. CB-20A
USER'S MANUAL
MODEL NO.: CB-20A
BUILT-IN
INDUCTION COOKING UNIT
20 FEB 2008
Pg. 1

Advertisement

loading

Summary of Contents for saro CB-20A

  • Page 1 Model No. CB-20A USER'S MANUAL MODEL NO.: CB-20A BUILT-IN INDUCTION COOKING UNIT 20 FEB 2008 Pg. 1...
  • Page 2: How Does Your Induction Work

    Model No. CB-20A HOW DOES YOUR INDUCTION WORK? A high frequency (20-35KHz) induction coil underneath the ceramic top plate heats the cooking utensil by magnetic friction. The heat is produced directly within the pan and is controlled by an electronic circuit which offers superior performance and functions.
  • Page 3 Model No. CB-20A USE AND CARE INSTRUCTIONS – IMPORTANT SAFEGUARDS DO NOT block the air-intake panel, as this may overheat the unit. We recommend pans to be in the range of 12~26cm in diameter. Please refer to the next page for a list of suitable and unsuitable pans.
  • Page 4: Safety Devices

    Model No. CB-20A SAFETY DEVICES Automatic Safety Shut-Off, If the induction unit is left on for more than 60 seconds without a pan or with an incompatible pan, the unit will automatically shut off. Material Compatibility Detector If the pan’s material or it’s dimensions are not suitable for the induction unit, the power indicator light will not light.
  • Page 5: Cause Of Overheating

    Model No. CB-20A OPERATING INSTRUCTIONS Ensure electrical supply matches the specifications of the data plate located on the base of the unit. Place pan on the centre of the ceramic top. Press power ON/OFF key, power indication lamp will be on.
  • Page 6: Specifications

    Model No. CB-20A SPECIFICATIONS Model No. CB-20A Induction Hob Voltage 230V~50Hz Vitro-ceramic Plate 380mm x 360mm Electrical Power Consumption Max. 2000 watt Electrical Power Range Approx. 250 watt ~ 2000 watt Dimension 380mm x 360mm x 75mm Cut Out Dimension...
  • Page 7: Troubleshooting

    Model No. CB-20A TROUBLE SHOOTING If your induction unit appears not to be working properly, it doesn't necessarily mean it's faulty. In all cases, check the following points. Malfunction Check….. No indication light when power "on" Cable/terminal block is loose Broken circuit of fuse;...

This manual is also suitable for:

Cb-20301-1100