Epson MovieMate 60 User Manual page 58

3. Loosen the lamp cover screw using the screwdriver that came with the replacement lamp.
(The screw won't come all the way out.) Then slide out the lamp cover and lift up to
remove it.
4. Loosen the two silver screws holding the lamp in place. (You can't remove these screws.)
5. Grasp the lamp handle as shown and pull the lamp straight out.
Note:
local regulations regarding disposal or recycling. Do not put in the trash.
58
Caring for Your Epson MovieMate
The lamp(s) in this product contain mercury. Please consult your state and