Epson MovieMate 60 User Manual page 17

Your projector should be directly in front of the screen or
wall, facing straight ahead (at a 90-degree angle to the
surface).
If the image is too low, you can raise it by extending the feet
and tilting the projector up. This causes the image to lose its
rectangular shape. You can adjust the shape using the
keystone buttons on the remote control or the Visual Setup
menu. See page 24 for instructions.
The farther you place the projector from the screen or wall,
the larger the image will be.
The following tables list the distances required for various image sizes (measured diagonally).
Note that the zoom adjustment also affects image size.
Wide screen aspect ratio (16:9)
Image size (diagonal)
30 in.
50 in.
60 in.
70 in.
80 in.
100 in.
150 in.
200 in.
300 in.
Projection distance
2.9 to 4 ft. (0.89 to 1.2 meters)
4.9 to 6.7 ft. (1.5 to 2 meters)
5.9 to 8 ft. (1.8 to 2.4 meters)
6.9 to 9.4 ft. (2.1 to 2.9 meters)
7.9 to 10.7 ft. (2.4 to 3.3 meters)
9.9 to 13.4 ft. (3.0 to 4.1 meters)
14.9 to 20.1 ft. (4.5 to 6.1 meters)
19.9 to 26.9 ft. (6.1 to 8.2 meters)
29.9 ft. (9.1 meters)
Unpacking and Setting Up
17