Power - Gigabyte GA-Z270-Gaming K3 User Manual

2-7

Power

& Platform Power Management
Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)
& PEG ASPM
Allows you to configure the ASPM mode for the device connected to the CPU PEG bus. This item is
configurable only when Platform Power Management is set to Enabled. (Default: Enabled)
& PCH ASPM
Allows you to configure the ASPM mode for the device connected to Chipset's PCI Express bus. This item
is configurable only when Platform Power Management is set to Enabled. (Default: Enabled)
& DMI ASPM
Allows you to configure the ASPM mode for both CPU side and Chipset side of the DMI link. This item is
configurable only when Platform Power Management is set to Enabled. (Default: Enabled)
& AC BACK
Determines the state of the system after the return of power from an AC power loss.
Always Off T he system stays off upon the return of the AC power. (Default)
Always On The system is turned on upon the return of the AC power.
The system returns to its last known awake state upon the return of the AC power.
Memory
& Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled Disables this function. (Default)
Any Key Press any key to turn on the system.
Press POWER button on the Windows 98 keyboard to turn on the system.
Keyboard 98
Set a password with 1~5 characters to turn on the system.
Password
& Power On Password
Set the password when Power On By Keyboard is set to Password.
Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept.
To turn on the system, enter the password and press <Enter>.
Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter>
again without entering the password to clear the password settings.
- 35 -