Peripherals - Gigabyte GA-Z270-Gaming K3 User Manual

2-5

Peripherals

& Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard
graphics.
IGFX Sets the onboard graphics as the first display.
Sets the graphics card on the PCIEX16 slot as the first display. (Default)
PCIe 1 Slot
Sets the graphics card on the PCIEX4_1 slot as the first display.
PCIe 2 Slot
Sets the graphics card on the PCIEX4_2 slot as the first display.
PCIe 3 Slot
& OnBoard LAN Controller
Enables or disables the onboard LAN function. (Default: Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
& EZ RAID
Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions
on configuring a RAID array.
& Ambient LED
Enables or disables the onboard audio LED function.
Disables this function.
Off
Enables this function. (Default)
On
& Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
& USB 3.0 DAC-UP 2 (Output Voltage of USB 3.1 Gen 1 Ports on the Back Panel)
Allows you to increase the output voltage of the USB 3.1 Gen 1 ports on the back panel (the ones below
the PS/2 keyboard/mouse port) to strengthen the stability of your USB device(s).
Normal
Disable USB bus power
Voltage Compensation +0.1V Adds 0.1V to the original output voltage.
Voltage Compensation +0.2V Adds 0.2V to the original output voltage.
Voltage Compensation +0.3V Adds 0.3V to the original output voltage.
PTT Technology. (Default: Disabled)
Keeps the original output voltage. (Default)
D isables the power of the USB connectors. High-end audio players may
connect their own external USB power source.
- 31 -