Jumper Setting - Biostar Hi-Fi B85N 3D Setup Manual

Motherboard Manual

2.6 Jumper Setting

The illustration shows how to set up jumpers. When the jumper cap is placed on
pins, the jumper is "close", if not, that means the jumper is "open".
Pin opened
JCMOS1: Clear CMOS Jumper
Placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and
the CMOS data. Please carefully follow the procedures to avoid damaging the
motherboard.
※ Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to "Pin 2-3 close".
3. Wait for five seconds.
4. Set the jumper to "Pin 1-2 close".
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS.
JMPCI_TYP1: mSATA connector mode jumper
The jumper allows user to select mPCIe mode or mSATA mode for mSATA
connector.
12
Pin closed Pin1-2 closed
Normal Operation (default).
1 3
Pin 1-2 Close:
1 3
Pin 2-3 Close:
Clear CMOS data.
1 3
Pin 1-2 Close:
mPCIe Mode
1 3
Pin 2-3 Close:
mSATA Mode(default).