Configure Email Sending Using Web Based Management - Brother MFC-J4335DW Online User's Manual

Home > Security > Send an Email Securely

Configure Email Sending Using Web Based Management

Related Models: MFC-J4535DW
We recommend using Web Based Management to configure secured email sending with user authentication,
or email sending using SSL/TLS.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine's settings is located on the back of the machine and marked
"Pwd".
4. Go to the navigation menu, and then click Network > Network > Protocol.
Start from , if the navigation menu is not shown on the left side of the screen.
5. In the SMTP Client field, click Advanced Settings and make sure the status of SMTP Client is Enabled.
6. Configure the SMTP Client settings.
• Confirm that the email settings are correct after configuration by sending a test email.
• If you do not know the SMTP server settings, contact your network administrator or Internet Service
Provider (ISP).
7. When finished, click Submit.
The Test Send E-mail Configuration dialog box appears.
8. Follow the instructions in the dialog box to test the current settings.
Related Information
• Send an Email Securely
Related Topics:
• Access Web Based Management
> Configure Email Sending Using Web Based Management
401