Table of Contents
Advertisement
Quick Links
1. Product Name
Bubble Table
2. Product Code
22892
3. Colour
Typically black exterior
4. Brief Description
Decorative and highly visually appealing feature. With continuously rising bubbles and
colour changing integral lights
5. Contents
1 x Glass Cover
1 x Plastic Panel
1 x Metal Base
1 x Air pump
1 x 12V Adapter
1 x Remote Control
1 x Silver control box (inside the base)
1 x Funnel
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rompa 22892
Summary of Contents for Rompa 22892
- Page 1 1. Product Name Bubble Table 2. Product Code 22892 3. Colour Typically black exterior 4. Brief Description Decorative and highly visually appealing feature. With continuously rising bubbles and colour changing integral lights 5. Contents 1 x Glass Cover 1 x Plastic Panel...
- Page 2 Captivating for children and adults. Mains-operated (12V adapter included). Includes remote control. Not compatible with the ROMPA® Wi Fi range. The cover is glass and so this product is not suitable for challenging behaviours or vigorous interaction.
- Page 3 13. Installation Unpack carefully, ensuring that all components have been unpacked. Consider the following when choosing the location of your Bubble Table: Access to a plug Make sure use of the Bubble Table is visible and can be supervised at all times ...
- Page 4 Connect the adapter to the bottom of the silver box where it says ‘POWER’. Do NOT connect to the white wire. Attach the plastic air tubes coming from the round plastic panel to the pump. At this point test the system – plug in the adapter to make sure the lights and pump are functioning correctly.
- Page 5 Place the plastic panel on the metal base. Fill the plastic panel with water by placing the funnel in the hole at the top of the panel. Use a clean jug or bucket (without any debris or dirt inside). Do not use hot or ice cold water. While this product has been designed to work well with tap water, the product will need higher maintenance due to algae and the water may become cloudy.
- Page 6 • Check that the pump is plugged in correctly to the silver box • Check that this is making a noise If there is no sound coming from the pump, contact ROMPA® as a replacement pump may be required If there is sound coming from the pump, check that the installation instructions have been carried out correctly.
- Page 7 If these are secure, please contact us as it may be necessary to replace the silver control box. Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received –...
Need help?
Do you have a question about the 22892 and is the answer not in the manual?
Questions and answers