Freestyle NOMAD FS81202 Quick Start Manual

All manuals and user guides at all-guides.com
NOMAD
Model FS81202
Model FS81203
Model FS81204
FEATURES:
• 30 meters H2O
• Day/date/calendar
• Compass with degrees and direction
• Barometer with pressure trend
• Altimeter with cumulative ascent
and descent
• 99 lap memory chronograph
• Countdown timer
• 5 Alarms
• EL backlight
CONTROL BUTTONS
S1 – Start/split Button
S2 – Stop/reset Button
S3 – Mode Button
S4 – Light/adjust Button
S4 S1
S3 S2
DISPLAY MODES
The watch has eight display modes:
TIME, COMPASS (COMP), ALTIMETER
(ALTI), BAROMETER (BARO),
CHRONOGRAPH (CHRO), TIMER,
ALARM and TEMPERATURE (TEMP).
To change from one display mode to
another, press S3 button once. The
mode description will appear for
around 2 seconds before the selected
mode is activated.
TO USE THE BACKLIGHT
Press S4 button to turn on the
backlight for 3-5 seconds.
OTHERS
In any setting/viewing mode, if there
is no key manipulation for around 1-
2 minutes, the watch will automatically
save the entered data and exit the
setting/viewing mode.
TO SET THE TIME AND
CALENDAR
1. Press S3 button to select TIME
mode.
2. Press S4 button for around 3
seconds.The message "Set-Time"
will be displayed.
3. Press S3 button once, the hour
digits will blink.
4. Press S1/S2 button to set the hour
digits. Holding down the button will
speed up the process.
5. Press S3 button once, the minute
digits will blink.
6. Press S1/S2 button to set the
minute digits.
7. Follow the same pattern to set the
second, year, month, date and hour
format.
8. To set the second digits, press S1/S2
button to reset the second digits to
00.
9. To set the hour format, press S1/S2
button to toggle between 12-hour
and 24-hour format. The P.M.
indicator may be displayed to
indicate the time period 12:00 A.M.
– 11:59 P.M. in 12-hour format.
10.After finish making all the settings,
press S4 button to confirm.
TO SET NIGHT, CHIME AND BEEP
1. In TIME mode, press S4 button for
around 3 seconds. The message
"Set-Time" will be displayed.
2. Press S1/S2 button to select option
mode. The message "OPTION" will
be displayed.
3. Press S3 button continuously to
select among NIGHT, CHIME or
BEEP mode.
4. Press S1/S2 button to activate or
deactivate each mode.
5. After finish making all the settings,
press S4 button to confirm.
NOTE: When NIGHT mode is activated,
the NIGHT mode icon will appear.
The backlight will turn on for 3-5
seconds when any button is pressed.
NIGHT mode will turn off automatically
after 8 hours.
TO SHOW DUALTIME (T1 OR T2)
1. In TIME mode, press and hold S2
button to view T1 or T2 time zone.
2. Press and hold S2 button for around
4 seconds to swich to display T1 or
T2 time zone.
3. Follow the same pattern to toggle
between displaying T1 and T2 time
zones.
TO SHOW CALENDAR OR
TEMPERATURE
1. In TIME mode, press and hold S1
button to view calendar or
temperature.
2. Press and hold S1 button for 4
seconds to switch to display
calendar or temperature.
3. Follow the same pattern to toggle
between temperature and calendar
displays.
TO USE THE COMPASS
1. Press S3 button to select COMPASS
mode. The direction, degree and
time will be displayed.
NOTE: In COMPASS mode, if there is
no key manipulation for around 30
seconds, the compass sensor will be
deactivated for power saving. Press
S1/S2/S4 button to re-activate the
compass sensor. If the compass
sensor is deactivated for around 10
minutes, the watch will automatically
return to TIME mode.
NOTE: This moving dot represents the
direction of North (N).
TO TAKE A NEW "MARK ANGLE"
In COMPASS mode, press S1 button to
take a "mark angle". A new mark will
blink to indicate the marked direction
and a new "mark angle" (in degree)
will be displayed.
1. Press S1 button to take another
"mark angle".
2. Press S2 button to return to
COMPASS mode.
TO SHOW THE LAST "MARK
ANGLE" OR TIME
1. In COMPASS mode, press S2 button
to display to display the previous
"mark angle". A mark will blink to
indicate the previously marked
direction and the previous "mark
angle" (in degree) will be displayed.
2. Press S2 button again to return to
COMPASS mode.
TO CALIBRATE THE COMPASS
1. In COMPASS mode, press and hold
S4 for around 3 seconds. The
message "CALIB" will be displayed.
2. Press S3 button to start the
calibration.
3. When the message "2-TURN" is
displayed, a series of moving dots
will be displayed at the rim of the
display and increase in clockwise
direction. Rotate the watch
horizontally in counter-clockwise