Table of Contents
Advertisement
Synology DiskStation at a Glance
No.
Article Name
1)
LED Indicators
2)
USB 2.0 Port
3)
Copy Button
4)
Power Button
5)
Fan
6)
USB 3.0 Ports
7)
RESET Button
8)
LAN Port
9)
Power Port
4 Chapter 1: Before You Start
Location
The LED indicators are used to display the status of the internal disk and the
system. For more information, see "Appendix B: LED Indication Table" on
Front Panel
Page 17.
The Synology DiskStation offers USB 2.0 ports for adding additional external
Front Panel
hard drives, USB printers, or other USB devices.
The Copy button lights up when you connect a USB Device to the USB port.
Pressing the button will copy the data from the connected USB device to
Front Panel
Synology DiskStation's internal HDD.
The power button is used to turn Synology DiskStation on or off.
Front Panel
To turn off Synology DiskStation, press the power button and hold it until you
hear a beep sound and the Power LED starts blinking.
The fan is built to exhaust waste heat out of Synology DiskStation. If the fan is
Back Panel
malfunctioning, the system will play beep sounds.
The Synology DiskStation offers USB 3.0 ports for adding additional external
Back Panel
hard drives, USB printers, or other USB devices.
1. To restore IP, DNS, passwords for the admin account to default value.
Back Panel
2. To reinstall the Synology DiskStation.
The LAN port is where you connect RJ-45 cable to Synology DiskStation.
Back Panel
The power port is where you connect the AC adapter to Synology DiskStation.
Back Panel
Description
Advertisement
Table of Contents
