Table of Contents
Advertisement
•
Wash stainless steel parts with water, and then
dry them with a soft cloth.
PAN SUPPORTS
The pan supports are not resistant to
washing in a dishwasher. They must
be washed by hand.
1. Remove the pan supports to easily clean the
hob.
Be very careful when you replace
the pan supports to prevent the
hob top from damage.
2. The enamel coating occasionally can have
rough edges, so be careful when you wash the
pan supports by hand and dry them. If
necessary, remove stubborn stains with a paste
cleaner.
3. After you clean the pan supports, make sure
that they are in correct positions.
4. For the burner to operate correctly, make sure
that the arms of the pan supports are aligned
with the centre of the burner.
REMOVING PAN SUPPORTS
To keep the pan supports in the correct position,
they are put on metal pins installed in the rear side
of the hob. For easier cleaning, pan supports can
be removed from the hob. Lift up the pan supports
keeping them in horizontal position as shown in the
graphic.
Do not lift the pan supports at an
angle, as this will put strain on the
metal pins. This can cause damage to
the pins and cause them to break.
The shape of pan supports and the amount of
burners can be different in other models of the
appliance.
CLEANING THE HOB
•
Remove immediately: melted plastic, plastic
foil, sugar and food with sugar, otherwise, the
dirt can cause damage to the hob. Take care to
avoid burns.
•
Remove when the hob is sufficiently cool:
limescale rings, water rings, fat stains, shiny
metallic discoloration. Clean the hob with a
13
Advertisement
Table of Contents
