Installation - Inalto IOMW20B User Manual

20l microwave
Hide thumbs Also See for IOMW20B:
Table of Contents

Advertisement

Installation

COUNTER TOP INSTALLATION
Remove all packing material and accessories.
Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the
microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to protect
the magnetron.
0cm
INSTALLATION LOCATION
When deciding on an installation place, keep in mind
the following points:
Select a level surface that provide enough open
space for the intake and/or outlet vents.
The minimum installation height is 85cm.
The rear surface of appliance shall be placed
against a wall.
Leave a minimum clearance of 30cm above the
microwave, a minimum clearance of 20cm is
required between the microwave and any
adjacent walls.
Do not remove the legs from the bottom of the oven.
Blocking the intake and/or outlet openings can
damage the oven.
Place the oven as far away from radios and TV as
possible. Operation of microwave oven may cause
interference to your radio or TV reception.
Plug your oven into a standard household outlet.
Be sure the voltage and the frequency is the same as
the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop
or other heat-producing appliance. If installed near
or over a heat source, the microwave oven could be
damaged and the warranty would be void.
THE ACCESSIBLE SURFACE MAY
BE HOT DURING OPERATION.
8

Advertisement

Table of Contents
loading

Table of Contents