Table of Contents
Advertisement
FROZEN VEGETABLES FUNCTION
–
Press the "FROZEN VEG" button repeatedly until the
number you wish appears in the display, "150", "350",
"500"g will display in order.
Press "START/+30" to begin cooking, the alert will
–
sound once. When cooking has finished, the alert will
sound 5 times and then resume standby mode.
BEVERAGE WARMING FUNCTION
Press the "WARM DRINK" button repeatedly until
–
the number you wish appears in the display, "1", "2",
"3" cup will display in order. One cup is about 120ml.
For example, press "WARM DRINK" once, "1" will
appear.
–
Press "START/+30" to begin warming, the alert will
sound once. When cooking has finished, the alert will
sound 5 times and then resume standby mode.
PLATE WARMING FUNCTION
Press the "WARM PLATE" button repeatedly until
–
the number you wish appears in the display, "250",
"350", "500"g will display in order. For example, press
"WARM PLATE" once, "250" will appear.
Press "START/+30" to begin warming, the alert will
–
sound once. When cooking has finished, the alert will
sound 5 times and then resume standby mode.
PIZZA FUNCTION
Press the "PIZZA" button repeatedly until the
–
number you wish appears in the display, "100", "200",
"400"g will display in order.
–
Press "START/+30" to begin cooking, the alert will
sound once. When cooking has finished, the alert will
sound 5 times and then resume standby mode.
MEMORY FUNCTION
–
Press "0/MEMORY" to choose between the memory
1–3 procedure. The screen will display "1", "2", "3".
–
If the procedure has been set, press the
"START/+30" button to use it. If not, continue to set
the procedure. Only one or two stages can be set.
–
After you finish confirming the setting, press
"START/+30" once to save the procedure and turn
back standby mode. If you press "START/+30" again,
it will start cooking.
Example
Setting 80% microwave power for 3 minutes and 20
seconds as the second memory option.
1.
In the standby mode, press "0/MEMORY" twice, stop
pressing when the screen displays "2".
2. Press the "COOKING TIME" button once, then press
"3", "2", "0" in order.
3. Press "POWER" once, the screen will display "PL10".
Then press "8", "PL8" will display.
4. Press the "START/+30" button to save the setting.
The alert will sound once and then resume standby
mode. If you press "START/+30" twice after
Step 3, the procedure will be saved as memory 2
and operate.
5. If there is no interruption to the electricity supply,
the procedure will remain saved. If there is an
interruption, you will need to reset this procedure.
6. If you want to run the saved procedure, in stanby
mode, press the "0/MEMORY" button twice. The
screen will display "2", then press "START/+30" again
to begin cooking.
INQUIRING FUNCTION
In cooking state, press "CLOCK", the screen will
–
display clock for three seconds.
In the microwave cooking state, press "POWER"
–
to inquire microwave power level, and the current
microwave power will be displayed. After three
seconds, the oven will turn back to the previous
state. In multi-stage state, the inquiring way can be
done using the same procedure above.
13
Advertisement
Table of Contents
