3.19 Audio Connectors
The HS-2621 has an onboard RealTek ALC202A audio connector. The
following tables list the pin assignments of the Line In/Audio Out
connector.
CN16: MIC In/Line Out Connector
PIN Description PIN Description
1
AOUTL
3
GND
5
MIC IN L
7
GND
3.20 CompactFlash Connector
The HS-2621 also offers a Type I/II CompactFlash connector is IDE
interface located at the solder side of the board. The designated CN17
connector, once soldered with an adapter, can hold CompactFlash
cards of various sizes. Please turn off the power before inserting the
CF card.
Inserting a CompactFlash card into the adapter is not a difficult task.
The socket and card are both keyed and there is only one direction for
the card to be completely inserted. Refer to the diagram on the
following page for the traditional way of inserting the card.
JP1: CF Use Master/Slave Select
Options
Slave (default)
2
AOUTR
4
GND
6
MIC IN R
8
GND
Setting
Master
Short
Open
1
2
7
8
1
2
23