Use Of Your Product; Use Of Gas Burners - Nordmende CSG50WH Operating And Installation Instructions

4. USE OF YOUR PRODUCT

4.1 Use of gas burners

Ignition of the burners
To determine which knob controls which burner, check the position symbol above the knob.
• Manual Ignition of the Gas Burners
If your appliance is not equipped with any ignition aid or in case there is a failure in the electric
network, follow the procedures listed below
For Hob Burners: To ignite one of the burners, press and turn its knob counter-clockwise so that the
knob is in maximum position, approach a match, taper or another manual aid to its upper
circumference. Move the ignition source away as soon as you see a stable flame.
For Oven Burner: To ignite the oven burner, press and turn the oven control knob counter-clockwise so
that the knob is in maximum position, approach a match, taper or another manual aid to the ignition
hole that is located on the front left corner of the burner. Move the ignition source away as soon as you
see a stable flame.
For Grill Burner: To ignite the grill burner, turn the grill valve in the clockwise position until the marker
on the knob points at the grill sign. Then, keep the knob pressed and approach a match, taper or
another manual aid to the holes that are situated on the burner. Move the ignition source away as soon
as you see a stable flame.
• Electrical Ignition
Electrical ignition of gas burners can be done in two ways; depending on the configuration of your
appliance .
Figure 16
Ignition Through Hob Valve (micro switch): Press the valve of the burner you want to operate and
turn the valve in the counterclockwise direction (clockwise for the grill burner) so that the knob is in
maximum position while keeping the knob pressed. The spark plugs will generate sparks as long as
you keep the control knob pressed. The micro switch placed under the knob will automatically
create sparks through the spark plug of the burner. Continue pressing the knob until you see a
stable flame on the burner.
:
Ignition by Spark Button: Press the valve of the burner you want to
operate and turn the valve in the counter-clockwise direction so that the
knob is in maximum position and with your other hand, press the ignition
button (Figure 16) at the same time. Press the ignition button
immediately, because if you wait, a build up of gas may cause the flame to
spread. Continue pressing the ignition button until you see a stable flame
on the burner.
14