IBCcontrol VariMax50M Manual page 25

Continued from previous page
Address Name
10 Current rotor
speed
11 Error code
12 Tripped control
Designation
Only calculated if the speed
reference value remains constant
between two pulses on the
rotation monitor. Displays 0 if no
value is available.
To ensure the correctness of
the measured value the speed
reference value should be
changed. This will cause the
registry to read as 0 until the
current value is displayed.
Reads 0 if no error, 3-23 error
code according to Discrete
inputs, other codes internal
faults.
Reads 1 if VariMax has tripped.
23
Data Read/ Factor Unit
form Write
UINT 16 Read 100
UINT 16 Read
UINT 16 Read
rpm