Transponder; Figure 3-1. Ais Transponder Interconnection Diagram - L3 Communications ProTec AISD1000-00 Installation And Operation Manual

3.1. Installation
The L-3 ProTec Transponder has been designed for easy installation into any exist-
ing bridge layout. Figure 3–1 gives a general representation of the system layout.
Installation can be broken down into 5 distinct operations as follows:
F

Transponder

VHF Antenna
F
F GPS Antenna
F Data Interface
F Powerup and Configuration
Each operation will be discussed in detail below. In regards to 3rd part components
such as VHF and GPS antennas and Gyro interfaces, it is suggested that the
installation procedures suggested by the manufacturer be followed in lieu of these
procedures.
VHF Antenna
150M-W2VN
communications
AUTOMATIC IDENTIFICATION SYSTEM
TRANSPONDER UNIT
Junction
Box
(Optional)
24 VDC
Figure 3–1. AIS Transponder Interconnection Diagram
165M0601-00
Feb. 01/05
Aviation Recorders
Marine Systems
ProTec AIS Installation
GPS Power
24VDC - 10 Amp
STATUS
ON / OFF / DIM
PILOT
IEC 61162 HDG, SOG, COG, ROT, POSN
AIS DATA
AIS DATA
AIS DATA
(Optional)
PILOT/PC
IEC 61162 HDG, ROT
POSN, SOG, COG
SHIP
SENSORS
RADAR
ECDIS
PILOT/PC
Initial Issue
Page 3–3