Table of Contents
Advertisement
This product and related documentation must be reviewed for familiarization with safety
markings and instructions before operation.
This board was constructed in an ESD (electro static discharge) protected environment. This is
because most of the semiconductor devices used in this board are susceptible to damage by static
discharge.
Depending on the magnitude of the charge, device substrates can be punctured or destroyed by
contact or mere proximity of a static charge. The results can cause degradation of device perfor
mance, early failure, or immediate destruction.
These charges are generated in numerous ways such as simple contact, separation of materials,
and normal motions of persons working with static sensitive devices.
When handling or servicing equipment containing static sensitive devices, adequate precautions
must be taken to prevent device damage or destruction.
Only those who are thoroughly familiar with industry accepted techniques for handling static sen
sitive devices should attempt to service circuitry with these devices.
In all instances, measures must be taken to prevent static charge build up on work surfaces and
persons handling the devices.
165M0601-00
Feb. 01/05
Aviation Recorders
Marine Systems
GENERAL
Initial Issue
Page iii
Advertisement
Table of Contents
