Advertisement
6 Responsibility of the manufacturing plant
6.1 The products produced shall conform to the product standards, and if there
is any inconsistency, the company shall be responsible for replacing and
returning the goods.
6.2 Due to personal or property damage caused by defects in product
manufacturing, our company assumes corresponding responsibilities, but we
have no responsibility for one of the following situations: a) The purchaser and
the operating user do not follow the instructions, and do not follow the safety.
Precautions and cautionary instructions;
b) Violation of the product's transportation, installation, use, maintenance,
storage, etc., resulting in damage to the product, personal or property.
6.3 Our company will provide life-long maintenance and technical services for
the products. The quality problems incurred during the quality assurance
period will be free of charge for the user. 10. Replacement of accessories
When the parts need to be replaced, they must be purchased from the
company.
7 Storage and transportation
7.1 Storage: When storing the instrument, it should be placed in the original
packing box and placed in a well-ventilated clean room. The packing box
should be raised, the ambient temperature is - 10 °C ~ 40 °C, the relative
humidity is not more than 9 3%, no harmful gas is allowed, flammable,
explosive materials and corrosive gases.
7.2 Transportation: The instrument under packaging conditions is suitable for
road, rail, air and water transportation. It should be protected from severe
vibration and shock during loading and unloading and transportation, and
should not be damp. It should not be mixed or mixed with flammable and
corrosive substances. Transportation, specific requirements are in accordance
with the order contract.
8 Warranty Card
Advertisement
