Intel B785Z Manual page 30

Motherboard
Enabled Activate automatically when the system boots up causing a
warning message to appear when anything attempts to access
the boot sector or hard disk partition table.
Disabled No warning message to appear when anything attempt to
access the boot sector or hard disk partition table.
CPU Internal Cache
All the processors that can be installed in this motherboard use internal (level
1) cache memory to improve performance. Leave this item at the default
value Enabled for better performance.
External Cache
Most of the processor cartridges that can be installed in this
motherboard have (level 2) external cache memory (the Celeron-
266MHz is an exception). Only enable this item if your processor
cartridge has external cache memory.
CPU L2 Cache ECC Checking
This item can be used to enable ECC (Error Checking Code) for the level-2
cache memory. We recommend that you leave this item at the default value
Enabled.
Quick Power On Self Test
You can enable this item to shorten the power on testing and have your
system start up a little faster.
Boot Sequence
This item defines where the system will look for an operating system, and the
order of priority. You can boot an operating system from many locations
including a SCSI device, a ZEP drive, a floppy diskette drive, or an LS-120
high-capacity diskette drive.
Swap Floppy Drive
If you have two floppy diskette drives in your system, this item allows
you to swap around the assigned drive letters so that drive A becomes
drive B, and drive B becomes drive A.
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: A, C, SCSI
Default: Disabled
29