Motherboard
Installing the Audio Application (AP)
After the Audio driver had been installed completely, you may
install the Audio AP to enjoy the musical by friendly musical control
panel - AudioRack32. The installation steps as shown in the following:
1. Put the "driver CD" into your CD-ROM drive. (Please make sure it' s
under Win98/95 mode)
2.
The CD title will be auto-run. If not, please click the "start" button
and select "Run" item. Then type-> D:\setup (D is assigned your
CD-ROM Device)
3.
Click "Audio" ... .
4.
Click the ESS 1869/1898 ...
Click here !
48