Table of Contents
Advertisement
2. Find out the state of the TV
It is important to know if a TV is in 'virgin mode' (out of the box) or has been installed before.
If you can see this screen below, you know that the TV is in 'out of the box' state and you can install the set by using
the procedure described in chapter 4 of this manual.
If you power on the set and then press the 'Home' button on the guest remote, you will see this screen appear if the
TV already has been installed or if the wizard was already skipped.
Professional Setting ON
Professional Setting OFF
You can start the installation wizard again by reinstalling the TV as explained in chapter 3 of this manual.
Disable the Professional Settings
Access the setup menu press the "RC6 SETUP" key, and then press the "Home/Menu" button. With the guest
remote control, press the following keys in sequence: "3,1,9,7,5,3, MUTE".
Go to [Professional Mode] and select the [OFF] option and confirm with "OK". Press "HOME" and select the option
Store and Restart Now, Confirm with "OK". After restarting the TV the PROFESSIONAL SETTINGS mode will be set to
OFF.
4
Advertisement
Table of Contents
Need help?
Do you have a question about the EasySuite HFL3 10T Series and is the answer not in the manual?
Questions and answers