Epson Stylus Photo R320 Printer Basics Manual page 61

Message
Close the CD/DVD guide.
The CD/DVD tray is not set correctly. Reload the tray,
then press the maintenance button.
The inserted card cannot be used with this printer.
Bluetooth Photo Print Adapter error. Disconnect the
Adapter from the printer, then reconnect it.
System error. Simultaneously press and hold the Power
and Stop button for 7 seconds to turn off the printer.
Ink icon blinks
Communicating with computer. Please wait.
The connected device cannot be used.
Solution
Close the CD/DVD guide, then
(
press the Maintenance
button.
If the CD/DVD tray is inserted,
remove the CD/DVD tray, then
close the CD/DVD guide.
Reload the CD/DVD tray, then
(
press the Maintenance
button (see page 42).
Use a compatible, formatted
memory card (see page 13).
Disconnect the adapter, then
reconnect it to the printer.
Turn the printer off, then after a
few seconds, turn it on again. If
the error is not cleared, contact
your dealer.
The printer is low on ink. Obtain
a replacement ink cartridge (see
page 52).
Start printing from the LCD
panel after printing from the
computer is completed.
Connect an external storage
device that is compatible with
the printer (see page 14).
Diagnosing Problems
61