Table of Contents
Advertisement
Intelligent dosing system
en
Filling the dispensers:
The lids of the dispensers in the
detergent drawer are marked with the
following symbols:
ß Standard/universal detergent
■
i Fabric softener
■
Open the detergent drawer.
1.
Open the dispenser lid(s).
2.
Add detergent and/or fabric
3.
softener. Do not fill above the max.
marking.
Close the lid(s).
4.
Slowly push the detergent drawer in
5.
completely.
When the appliance is switched on, the
fact that the detergent drawer is closed
completely is indicated by the following:
If intelligent dosage i-DOS w or
■
i-DOS i has been selected, the
corresponding indicator lights up.
If intelligent dosage has not been
■
selected, the indicator flashes once
and then goes out.
The ù symbol in the display panel
■
goes out.
44
Everyday use
Indicator lights in the display panel:
The display lights up if intelligent
■
dosage has been selected for the
dispenser.
The display flashes if the fill level of
■
the selected intelligent dosing
dispenser is below the minimum
level.
(De)selecting intelligent dosage and
adjusting the dosage strength:
The intelligent dosages for detergent
and fabric softener are set at the factory
for programmes in which intelligent
dosage can be used.
Overview of programmes ~ Page 30
The dosage strength has been preset to
low (lightly soiled laundry) for
detergent w and to medium
(medium level of softness) for fabric
softener i. It can be changed for each
programme. ~ Page 38
In addition to intelligent dosage,
cleaning aids (e.g. stain remover) can
be added manually to compartment
v u, if necessary. ~ Page 46
The selection (on/off) and the
Note:
selected dosage strength for i-DOS i
and i-DOS w are saved for each
programme until they are changed
again, even if the washing machine is
switched off.
Advertisement
Table of Contents
