Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch 4242005035304
Summary of Contents for Bosch 4242005035304
- Page 1 Washing machine WAW28620AU Instruction Manual and Installation Instructions...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. - Page 4 Removing laundry/switching off the After-sales service ..59 appliance ..... 43 Consumption rates .
-
Page 5: Intended Use
Intended use Intended use This appliance is intended for private ■ I n t e n d e d u s e domestic use only. Do not install or operate this ■ appliance anywhere that is liable to experience frost and/or outdoor conditions. -
Page 6: Safety Instructions
Safety instructions Do not allow children to Safety instructions ■ clean or maintain this appliance unsupervised. T he following safety information Keep children under 3 years S a f e t y i n s t r u c t i o n s and warnings are provided to ■... -
Page 7: Installation
Safety instructions Warning Installation Risk of suffocation! Warning If allowed to play with the Risk of electric shock/fire/ packaging/plastic film or material damage/damage to packing components, children the appliance! may become caught in these or If the appliance is not installed pull them over their heads and properly, this may lead to a suffocate. - Page 8 Safety instructions If using a residual current Warning ■ circuit breaker, only use one Risk of injury/material that bears the following damage/damage to the mark: z. The presence of appliance! this mark is the only way to The appliance may vibrate or ■...
- Page 9 Safety instructions If the water hoses are altered Warning ■ or damaged, this may result Risk of injury! in material damage or The appliance is very heavy. ■ damage to the appliance. Lifting it may result in injury. The water hoses must not be Do not lift the appliance on kinked, crushed, altered or your own.
-
Page 10: Operation
Safety instructions If you reach into the drum Operation ■ while it is still rotating, you Warning risk injuring your hands. Risk of explosions/fire! Wait until the drum has Laundry that has been stopped rotating. pretreated with cleaning agents Warning that contain solvents, e.g. -
Page 11: Cleaning/Maintenance
Safety instructions Never take hold of the mains Caution! ■ plug with wet hands. Material damage/damage to When removing the mains the appliance ■ plug from the socket, always If the amount of laundry in ■ take hold of the plug itself the appliance exceeds its and never the mains cable, maximum load capacity, it... - Page 12 Safety instructions Warning Risk of injury/material damage/damage to the appliance! The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance. For safety reasons, use genuine spare parts and accessories only.
-
Page 13: Environmental Protection
Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 26 The displays provide information protection about the relative level of energy and water consumption in the selected P ackaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more indicator lights light up, Dispose of packaging in an the higher the programme's... -
Page 14: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions I ncluded with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 15: Safety Instructions
Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine. -
Page 16: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transportation securing bolts with a Notes wrench (WAF 13). -
Page 17: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose (approx. -
Page 18: Water Inlet
Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed. -
Page 19: Water Outlet
Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin). -
Page 20: Levelling
Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement". -
Page 21: Before Washing For The First Time
Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. To remove any water that may be left over from the test, run the first wash cycle without any laundry. Notes The washing machine must be ■... -
Page 22: Transportation
Positioning and connecting Transportation E.g. when moving house Caution! Risk of damage to the appliance caused by detergent/fabric softener leaking from the dispensers. Leaking detergent/fabric softener can Before switching on the appliance prevent the appliance from working again: correctly, e.g. due to damage to the Notes electronics. -
Page 23: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button. -
Page 24: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance W ashing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 41 Operating/display panel Door with door handle 9S Open the door... -
Page 25: Control Panel
Getting to know the appliance Control panel All the buttons are sensitive P Child lock 3 sec. (E) Note: (except for the main switch) and only to prevent the set functions from need to be pressed lightly. being changed accidentally: Press and hold the Finished in + and - button at the same time for ( Main switch... -
Page 26: Display Panel
Getting to know the appliance Display panel Finished in time ■ e.g. 2:30; Programme duration depends on the programme selection in h:min (hours:minutes), Preselection of end time ■ 1 - 24 h; Programme ends after ... h (h = hours), Base dosing quantity ■... - Page 27 Getting to know the appliance Further information Further information Switching off the appliance automatically: Programme progress: On OFF ~ Page 13, ~ Page 48 Prewash Washing Rinse à Spin - 0 - Programme end Programme end during Rinse Stop - P - Pause, e.g.
-
Page 28: Laundry
Laundry Some examples of soiling levels can Laundry be found on ~ Page 29 – Light: Do not prewash, select the P repare the laundry SpeedPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –... -
Page 29: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 30: Overview Of Programmes
Overview of programmes Overview of programmes P rogrammes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable. - Page 31 Overview of programmes Programme/type of laundry/information Settings Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C $ - 1600** rpm EcoPerfect, SpeedPerfect, Prewash, Rinse Plus, Easy Iron Detergent è, fabric softener è Delicates / Silk Max.
- Page 32 Overview of programmes Programme/type of laundry/information Settings Rinse / Spin Extra rinse/spin with selectable speed Note: . The Rinse Plus button is set by default for this $ - 1600** rpm programme. If you require a spin cycle only, press the button to Easy Iron deactivate the function.
- Page 33 Overview of programmes Programme/type of laundry/information Settings *** Jeans / Dark Wash Max. 3.5 kg Dark-coloured cottons and dark-coloured easy-care fabrics; Ž - 40 °C turn items inside-out before washing. $ - 1200 rpm EcoPerfect, SpeedPerfect, Prewash, Rinse Plus, Easy Iron Detergent è, fabric softener è...
- Page 34 Overview of programmes Programme/type of laundry/information Settings *** Outdoor Max. 2 kg Membrane-coated weatherproof or outdoor clothing and water- Ž - 40 °C resistant fabrics $ - 800 rpm Notes EcoPerfect, SpeedPerfect, Use special detergent suitable for machine washing; add ■...
- Page 35 Overview of programmes Programme/type of laundry/information Settings *** Automatic 40°C Max. 6 kg Hard-wearing fabrics; 40 °C The degree of soiling and the type of fabric are automatically $, 1400 rpm detected and the washing sequence and intelligent dosage are adjusted accordingly.
-
Page 36: Starching
Overview of programmes Starching Laundry should not be treated Note: with fabric softener. Switch on the appliance. Select the Rinse programme. Pour liquid starch into compartment v u in accordance with the manufacturer's instructions (clean first if necessary). Press the A button. Dyeing/bleaching Dye should only be used in normal household quantities. -
Page 37: Programme Default Settings
Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Finished in T he default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after Before starting the programme, you selecting the programme. -
Page 38: I-Dos Settings
Programme default settings i-DOS settings Your washing machine has an intelligent dosing system for liquid detergent and fabric softener. The washing machine doses your detergent and fabric softener automatically in most programmes. ~ Page 30 The following have been preset at the factory: i-DOS w : ¨... -
Page 39: Additional Programme
Additional programme settings Rinse Plus Additional programme Additional rinse cycle for particularly settings sensitive skin and/or for areas with very soft water. An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s which can be selected depending on Easy Iron the programme, can be found from... -
Page 40: Operating The Appliance
Operating the appliance The maximum load and the duration ■ Operating the of the programme (alternately) The indicator light for the i-DOS appliance ■ settings, if intelligent dosage has been selected P reparing the washing Information on water and energy O p e r a t i n g t h e a p p l i a n c e ■... -
Page 41: Measure And Add Detergent And Care Products
Operating the appliance Unfold presorted laundry items and Change the programme place them in the drum. default settings Make sure that no items of laundry are trapped between the door and You can use the default settings for the rubber seal, and close the door. each washing cycle or change them. -
Page 42: Start The Programme
Operating the appliance Start the programme Adding laundry Press the A button. The indicator lamp After starting the programme, you can lights up and the programme starts. add or remove laundry if necessary. The display panel shows the "Ready in" Press the A button to do this. -
Page 43: Cancel The Programme
Operating the appliance Cancel the programme Removing laundry/switching off the appliance For programmes at high temperatures: Press the A button. Open the door and remove the To cool down laundry: Select Rinse. laundry. Press the A button. Press the # button. The appliance is switched off. -
Page 44: Intelligent Dosing System In The Detergent Drawer
Intelligent dosing system Notes Intelligent dosing Only use easy-pour liquid products ■ system that the manufacturer recommends adding to the detergent drawer. Do not mix different liquid I ntelligent dosing system in ■ detergents. If changing your liquid I n t e l l i g e n t d o s i n g s y s t e m the detergent drawer detergent (type, manufacturer, etc.), empty the dispenser completely and... -
Page 45: Everyday Use
Intelligent dosing system When the appliance is switched on, the In addition to intelligent dosage, fact that the detergent drawer is closed cleaning aids (e.g. stain remover) can completely is indicated by the following: be added manually to compartment v u, if necessary. ~ Page 47 If intelligent dosagei-DOS w or ■... - Page 46 Intelligent dosing system My water hardness: Notes Reduce the basic dosage if using a ■ very concentrated detergent. If large amounts of foam are ■ repeatedly created during washing, please check your basic dosage and dosage quantity settings. Certain types of liquid detergent can also create excessive amounts of Below is an example of detergent foam.
-
Page 47: Manual Dosage
Intelligent dosing system Manual dosage Dosing and adding detergent: Pull out the detergent drawer. For programmes that cannot be used with intelligent dosage, or if you would prefer to dose manually (in which case set intelligent dosage to "off" ö), add detergent to compartment v u. -
Page 48: Appliance Settings
Appliance settings Changing the signal volume Appliance settings Use the Finished in + or - button to Y ou can change the following settings: change the following settings at the A p p l i a n c e s e t t i n g s corresponding programme selector The volume of the buttons and the ■... -
Page 49: Sensors
Sensors Sensors A utomatic load sensing S e n s o r s Depending on the type of fabric and load, the automatic load sensing function optimally adjusts the water consumption and programme duration in each programme. Unbalanced load detection system The automatic unbalanced load detection system detects imbalances... -
Page 50: Cleaning And Maintenance
Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■... -
Page 51: I-Dos Detergent Draw And Its Housing
Cleaning and maintenance i-DOS detergent draw and its The detergent drawer can be removed completely to allow you to housing clean to dispensers after you have emptied them. Emptying the dispensers: a) Empty the dispensers before The dispensers have emptying removing the drawer. - Page 52 Cleaning and maintenance – Protect the rear drawer connector against water, detergent or fabric- softener residue; if necessary, clean the outer surfaces with a soft, damp cloth. Dry before putting back in. e) Clean the drawer and the cover with a soft, damp cloth or a hand shower.
-
Page 53: The Drain Pump Is Blocked, Emergency Draining
Cleaning and maintenance The drain pump is blocked, emergency draining Warning Risk of scalding! When you wash at high temperatures, the water gets very hot. If you come into contact with the hot water, you may be Put the service flap back on, lock it into place and close it. -
Page 54: Filter In The Water Supply Blocked
Cleaning and maintenance Filter in the water supply blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the A button. Allow the programme to run for approximately 40 seconds. Press the # button. -
Page 55: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. E mergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g. -
Page 56: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and ÿ The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■... -
Page 57: Faults And What To Do About Them
Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking out. Attach the drain hose correctly or replace it. ■ Tighten the screw connection of the drain hose. ■ The machine is not filling Have you pressed the A button? ■... - Page 58 Faults and what to do about them. Faults Cause/Remedy The programme is taking Not a fault – the unbalanced load detection system is adjusting an ■ longer than usual. imbalance by repeatedly distributing the laundry. Not a fault – the foam detection is system active – a rinse cycle has been ■...
-
Page 59: After-Sales Service
After-sales service Faults Cause/Remedy - P - and ÿ appear in the The door is unlocked. It is possible to add laundry. display panel when the cycle is paused. If you cannot rectify a fault yourself (after switching the machine off and on again) or a repair is required: Switch off the appliance and pull out the mains plug. -
Page 60: Programmes
Consumption rates Consumption rates E nergy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Additional Load Energy Water Programme... -
Page 61: Technical Data
Technical data Technical data T echnical data T e c h n i c a l d a t a Dimensions: 850 x 600 x 590 mm (height x width x depth) Weight: 70 - 85 kg (depending on model) Mains connection: Mains voltage 220 - 240 V, 50 Hz Nominal current 10 A... -
Page 62: Information For Test Institute
Technical data Information for test institute Items Instruction Pre-treatment of new Run two empty runs of Cottons 90 °C with 1400 rpm: The appliance 1st run with 50g detergent and 8g anti sudsing agent, the 2nd run without detergent and sudsing agent. According to standard AS NZS 2040.1-2005 AS NZS 2040.2-2005... -
Page 63: Aqua-Stop Warranty
Aqua-Stop warranty Aqua-Stop warranty O nly for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a... - Page 64 Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You´ll find it here. Expert advice for your Bosch home appliances, need help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.
Need help?
Do you have a question about the 4242005035304 and is the answer not in the manual?
Questions and answers