Removing & Installing Body Components; Battery - Honda Monkey 2021 Owner's Manual

Removing & Installing Body Components

Battery

Battery holder
Bolt
Washer
Battery
Positive
terminal
Removal
#
Make sure the ignition switch is in the
position.
1. Remove the seat.
2
2. Remove the battery holder by removing the
bolt and washer.
Negative
terminal
(Off)
P. 61
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery, taking care not to
drop the terminal nuts.
Installation
#
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
The alarm system will be deactivated if the
battery is disconnected.
The system will remain off when the battery is
reconnected.
To activate the system, see "Setting the Alarm
System." P. 28
2
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
terminal from
-
terminal from
+
+
P. 49
2
P. 83
2
59