Download Print this page

Hubbell 4012 Operating Instructions

Chance 2-ton hoist

Hide thumbs Also See for 4012:

Download this manual

210 North Allen Street

Centralia, MO 65240

NOTE: Hubbell has a policy of continuous product improvement. We reserve the right

to change design and specifications without notice.

P309-0358

Rev. N

Operating Instructions

Chance 2-Ton Hoist

Catalog No. 4012

Hoist Hook

Release Key

for

Shift Key

Finger

P309-0358

Rev. N

Need help?

Do you have a question about the 4012 and is the answer not in the manual?

Page 1 Hoist Hook Shift Key Finger Release Key 210 North Allen Street Centralia, MO 65240 NOTE: Hubbell has a policy of continuous product improvement. We reserve the right to change design and specifications without notice. P309-0358 P309-0358 © Copyright 2011 Hubbell Incorporated Rev.
Page 2 To Position Hoist for Use: WARNING When placing the hoist in operating position care must be taken to make sure that the load hook and the housing hook of the hoist are on the same centerline. If the hoist is restricted from adjusting itself to form a straight line with the direction of loading, damage to the hoist could occur.
Page 4 CAUTION 5. If necessary to replace the pawl post (019486) or release key (P309- 0346), press the pawl post out of handle (P309-0816) with a careful and The equipment covered in this instruction guide should be installed, used and steady force. In replacing the new pawl post (019486), be certain it is pressed serviced only by competent personnel familiar with and following good work in straight, using an even pressure, and that release key (P309-0346) is and safety practices.