Specifications - Canon CN-E30-300mm T2.95.3-7L S Operation Manual

Dimensions of parts
S type (EF mount)
350.1
16.5 9
UNC3/8-16
16
SP type (PL mount)
342.1
16.5 9 231.1
UNC3/8-16
16
Spur gear specifications
Focus drive gear
Number of teeth 169
Module 0.8 metric module
P.C.D. 135.2 mm
Angular rotation 300 degrees
GENERAL SAFETY INFORMATION
The safety warnings and cautions provided on the product or in this operation manual must be ob-
served. Failure to observe these warnings and cautions may result in injury or accident.Read this
operation manual carefully to familiarize yourself with its contents and ensure that you can operate the
product properly.
Also, store this manual in a safe place where it can easily be referenced whenever necessary.
This operation manual uses the following symbols and terms to identify hazards in order to prevent ac-
cidents.
This indicates a potentially hazardous situation which, if not heeded, may
WARNING
result in death or serious injury to you or others. Be sure to heed all warning
notices to ensure safe operation at all times.
This indicates a potentially hazardous situation which, if not heeded, may
CAUTION
result in a minor injury to you or others, or damage to property.
This indicates cautions and recommendations for operation. It contains in-
NOTE
formation which, if not heeded, may result in this product failing to function
properly. These notices also contain useful information for operation.
HANDLING THE PRODUCT
WARNING
1. Do not stare at the sun or other bright objects through the lens. It may injure your eyes.
CAUTION
1. Ensure that all mountings are securely tightened. If a mounting becomes loose, parts may fall off
and cause injury.
2. Inspect mountings regularly (about every six months to one year) to ensure they are securely
tightened. If a mounting becomes loose, parts may fall off and cause injury.
NOTE
1. Do not expose the lens to strong impact. Striking or dropping the lens may cause the malfunction
of the product.
2. This product is not waterproof. Take measures to avoid direct contact with rain, snow, or moisture.
Otherwise it may cause the malfuction of the product.
3. Take measures to avoid sudden changes in temperature where the lens is used, which may
prevent operation temporarily if condensation forms in the lens.
DEALING WITH ABNORMALITIES
WARNING
If any of the following situations occurs, immediately dismount the lens from the camera and
contact Canon's representative or the dealer listed below.
• Smoke, fumes, or unusual noises
• Entry of foreign objects (such as liquid or metal objects) inside the product
Pub No. BT1-B032-A
239.1 5.5
9 107.8
9 64.4
171.3
9 99.8
9 56.4 11.8
2±0.02
163.3
Zoom drive gear Iris drive gear
144
0.8 metric module 0.8 metric module
115.2 mm 107.2 mm
160 degrees 63 degrees

Specifications

Unit: mm
Lens Mount
Focal Length
Maximum T-stop
Iris Blade
Super 35mm
Coverage Image Circle /
H x V (1.78:1)
Angular Field of View
(H / V) at wide angle end
Angular Field of View
(H / V) at telephoto end
EOS C300
Coverage Image Circle /
H x V (1.78:1)
Angular Field of View
(H / V) at wide angle end
Angular Field of View
(H / V) at telephoto end
EOS C500
Coverage Image Circle /
H x V (1.9:1)
Angular Field of View
(H / V) at wide angle end
Angular Field of View
(H / V) at telephoto end
Minimum Object Distance (M.O.D.)
Object Dimensions
at M.O.D.
Focus Angular Rotation
Zoom Angular Rotation
Spur Gear Module
Front Diameter
Length
Weight
* A variety of professional camera accessories compatible with the φ19 mm rod system can be used
with this lens.
* This lens is compatible with EOS cameras that have a Super 35mm or equivalent sensor, or an
APS-C image sensor. The lens is not compatible with cameras that have a 35-mm full-size sensor or
an APS-H sensor.
Reference Information
This lens is a full manual lens for shooting movies.
134
• This lens is developed primarily for movie production, and have a color balance typical for movies. This means that
the color reproduction is warmer than that of EF lenses which are basically used to shoot still images. Therefore,
when using both types of lens together, adjust the color balance (redo the white balance etc.) as necessary.
• In general, the depth of field becomes shallow and the focusing range becomes extremely narrow near the widest
aperture and when shooting a subject at close range. In addition, this tendency increases for lenses with longer
focal lengths. When shooting images, carefully check the focusing condition using the zoom mode of the finder or
other means, and shoot a sufficient number of test images before performing focus operations.
NOTE
1. Clean off any dust on the lens surface using a lens blower or a soft lens brush. In case of getting
fingerprints or stains on the lens, use a clean cotton cloth moistened with commercial lens
cleaning fluid, or use lens cleaning paper. Gently wipe in a spiral pattern from the center of the
lens. Be careful not to rub dust across the lens, which may scratch the lens surface.
2. Routine inspection about once a year is recommended, depending on the conditions and
environment of use. Request overhaul, if needed.
CAUTION
Always attach the lens cap, hood cap, dust cap or covers before storage. Storing the lens without
the caps or covers attached poses a risk of fire if the lens concentrate light in direct sunlight.
NOTE
Immediately wipe off any moisture on the lens from misty or foggy environments, using a dry
cloth. Seal the lens in a plastic bag with a desiccant (preferably new) to prevent moisture inside.
Otherwise it may cause the mold or the malfunction of the product.
1. Canon shall bear no responsibility for damage resulting from improper operation of this product by
the customer.
2. Canon shall make no guarantees about the product quality, functions, or operation manual and its
marketability and suitability for the customer's purpose.
Moreover, Canon shall bear no responsibility for any damage, direct or incidental, that results from
usage for the customer's purpose.
3. Canon shall make no guarantees about the results obtained using this product.
4. The product specifications, configuration, and appearance are subject to change without prior
notice.
5. For further information on repairs, maintenance, or adjustments not mentioned in this operation
manual, contact your Canon dealer or your Canon sales representative.
6. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without
consulting Canon or your Canon sales representative.
CANON INC.
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Canon Europe Ltd
3 The Square, Stockley Park, Uxbridge,Middlesex, UB11 1ET UK
© 2017.05 CANON INC.
CN-E30-300mm
T2.95-3.7 L S
Canon EF
30 to 300 mm
T2.95 (f = 30 to 240)
T3.7 (f = 300)
11 pieces
φ27.5 mm /
24.0 x 13.5 mm
43.6 / 25.4 degrees
4.6 / 2.6 degrees
φ28.2 mm /
24.6 x 13.8 mm
44.6 / 25.9 degrees
4.7 / 2.6 degrees
φ29.6 mm /
26.2 x 13.8 mm
47.2 / 25.9 degrees
5.0 / 2.6 degrees
1.5 m / (from the image sensor)
98.8 x 55.6 cm at wide angle end
Super 35mm
9.6 x 5.4 cm at telephoto end
101.3 x 56.8 cm at wide angle end
EOS C300
9.9 x 5.6 cm at telephoto end
107.9 x 56.8 cm at wide angle end
EOS C500
10.5 x 5.6 cm at telephoto end
300 degrees
160 degrees
0.8 metric module
φ136 mm
350.1 mm
5.8 kg
MAINTENANCE AND INSPECTION
STORAGE
TO THE CUSTOMER
All rights reserved. No part of this operation manual
may be reproduced or copied in any from or by any
means without the written permission of Canon Inc.
CN-E30-300mm
T2.95-3.7 L SP
PL
342.1 mm