Page 1
SDC6 DMX Controller User Manual Order code: BOTE16...
Page 2
• Repairs, servicing and power connection must only be • Always disconnect the power from the mains when carried out by a qualified technician. THIS UNIT CONTAINS equipment is not in use or before cleaning! Only handle NO USER SERVICEABLE PARTS. the power-cable by the plug. Never pull out the plug by • This unit is for professional use only - it is not designed pulling the power-cable. for or suitable for household use. The product must be • Make sure that the available voltage is 240V AC~50Hz. installed by a qualified technician in accordance with local territory regulations. The safety of the installation is the • Make sure that the power cable is never crimped or responsibility of the installer. The fixture presents risks of damaged. Check the equipment and the power cable severe injury or death due to fire hazards, electric shock periodically. and falls. • If the equipment is dropped or damaged, disconnect the • WARRANTY: One year from date of purchase. mains power supply immediately and have a qualified engineer inspect the equipment before operating again. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk SDC6 DMX Controller User Manual...
Page 3
Made in P .R.C. POWER 01 - Power indicator 02 - Master fader: use this fader to MASTER control the overall DMX ouput for channel faders (1-6) 03 - Channel faders (1-6): use these faders to individually controll any of the 6 channels 04 - 3-Pin XLR output: use this output to connect the controller to a lighting fixture/dimmer pack 05 - Power switch 06 - DC 9V power input 07 - Battery compartment for PP3 9V battery (not included) In the box: 1 x controller, 1 x DC 9V adaptor & 1 x user manual www.prolight.co.uk SDC6 DMX Controller User Manual...
Page 4
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk SDC6 DMX Controller User Manual...
Page 5
5-pin XLR (socket) 3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk SDC6 DMX Controller User Manual...
Page 6
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk SDC6 DMX Controller User Manual...
Need help?
Do you have a question about the SDC6 and is the answer not in the manual?
Questions and answers