Hitachi VZ-HD3600A User Manual page 50

If this Happens
The remote control
doesn't work.
50
Way to Resolve the Problem
Are you pointing the remote control at the
receiver on the camera?
Point the remote at the receiver of the
camera and then operate it.
Is the receiver on the camera in direct
sunlight or under a bright light, such as
a fluorescent one? When the receiver is
under a bright light, it will not work.
Adjust the location and/or the angle of the
device.
Are there batteries in the remote control?
Check the batteries are facing the right
way as well. The batteries may be dead.
Replace the batteries.
Is the camera number the same on the
camera and the remote control?
Set the camera number on the remote
control so it is the same as the camera's
setting.
Is the camera turned on? Turn the camera
on.
Refer to
Page
P. 12
―
―
P. 17
P. 27
P. 27