Table of Contents
Advertisement
Appendix
Troubleshooting
Before requesting repairs, look at the following things. After doing so,
if there is still some problem in its operation and you cannot resolve it
yourself, please contact the store where you purchased it. Refer to P. 69 for
information on after sales service.
If this Happens
The power won't
turn on.
The camera is
plugged in properly,
but it still won't
come on.
When the power
is plugged in, the
head of the camera
moves around at
will.
The camera does
not pan and/or tilt.
No image appears
on the connected
monitor.
(Cont.)
Way to Resolve the Problem
Check and make sure the AC adapter
is securely plugged into the DC IN 12V
terminal of the camera and that the
power cord is plugged into both the AC
adapter and the outlet.
Has the camera been subject to a severe
shock?
The camera may be broken. Consult with
the store where you purchased it.
This is not a fault. When the power is
plugged in, the head of the camera will
first start to move. It then returns to the
home position automatically.
Do not touch the head of the camera
when it is moving.
Is there something preventing it from
moving?
Remove it and turn the power on again.
Check and make sure the monitor cable
is properly connected: DVI-I cable
[VZ-HD3600/3700/3780A] or HD-SDI
cable [VZ-HD3650/3700/3780A].
The video format of the camera OUT has to
match the video format of the monitor IN.
Check whether the Video Select switch is
set correctly.
Refer to
Page
P. 22
―
P. 27
―
P. 23
P. 14
47
Advertisement
Table of Contents
