Printing Problems - Epson Stylus Photo 1280 Printer Basics Manual

■
For Windows 2000, don't select
under
Block Control Panel>
System> Hardware> Driver
; select
Signing
instead.
■
Make sure Windows XP, Me,
2000, or 98 was preinstalled on
your system. The USB Printer
Device Driver may not install
correctly if you've upgraded your
system from an earlier version of
Windows.
■
Make sure the Universal Serial Bus
Controller is working properly. See
your Windows online help system
for details. If it's not working,
contact your computer
manufacturer.
■
If you're printing over a network,
see your on-screen Reference Guide
for instructions on configuring your
printer for use on a network.

Printing Problems

The Ppower light is on, but nothing
prints.
■
Make sure the interface cable
is connected securely and
the cable meets the system
requirements on page 31 or 32.
or
Ignore Warn
■
Run a printer check as described
on page 19. If the check page
prints, make sure your printer and
application software are installed
correctly.
■
If you're printing on a network, you
need to set up your printer for
network printing, as described in
your on-screen Reference Guide.
The printer sounds as though it is
printing, but nothing prints.
■
Make sure the print head nozzles
are not clogged. To clean the print
head, see page 5.
■
The printer won't operate properly
if it's tilted or at an angle. Place it
on a flat, stable surface.
Your printer makes noise when you
turn it on or after it has been sitting
for awhile.
Your printer is performing routine
maintenance.
21