Put On The Paper Support; Connect The Printer; Turn On The Printer; Install The Ink Cartridges - Epson Stylus Photo 1280 Start Here Manual

2
2
Put On the
Put On the
Paper Support
Paper Support
Insert the paper support into the slots on
the back of the printer. (Don't place it
in the paper feeder.)
3
3

Connect the Printer

Connect the Printer
1
Shut down your computer before attaching
the cable.
Leave the computer turned off until instructed
to turn it on in section 7.
2
Connect the
USB cable to your printer's USB port.
3
Connect the
any open USB port on your computer.
4
4

Turn On the Printer

Turn On the Printer
1
Plug the printer into a grounded electrical outlet.
2
Press the power button to turn on the printer.
Don't turn on your computer yet.
CAUTION: Always use the
Never use an external switch, such as a power strip switch or wall switch.
5
5

Install the Ink Cartridges

Install the Ink Cartridges
1
Lower the output tray
and open the cover.
2
Lift up the two ink cartridge clamps.
NOTE: You must install both ink cartridges,
or the printer won't work.
square end of the
flat end of the cable to
power button to turn the printer on or off.