Installing The Turbocharger; Placing The Turbocharger On The Bracket - ABB A100-L Series Original Assembly Instructions

Assembly Instructions / A100-L
4 Installing the turbocharger / 4.1 Placing the turbocharger on the
bracket
4

Installing the turbocharger

4.1

Placing the turbocharger on the bracket

Fig. 4: Placing the turbocharger
Remove covers from the oil connections.
u
Align turbocharger and place on engine bracket.
u
Tighten the fixing screws (Steps for fastening the turbocharger) while only slightly
u
loosening the lifting gear.
Remove lifting gear from turbocharger.
u
Connect cable to speed sensor.
u
Connect all gas, air and oil pipes.
u
© Copyright 2020 ABB. All rights reserved. HZTL455311P0002_EN Rev.A July 2020