Table of Contents
Advertisement
Connecting a paired Bluetooth
1
Turn on this unit.
• Press and hold [Í/I (
• A guidance message will be heard, and the power/pairing LED (blue) will blink slowly.
2
Perform steps 2 and 3 of "Pairing (Registration) this unit with the Bluetooth
connection". (
• When the power/pairing LED (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed.
(Connection established)
Note
• This unit remembers the device lastly connected. Connection may be automatically established after step 1 (see
above).
• If connection to a device is not established within approximately 5 minutes, the unit will be turned off. Turn on the unit
again. ([HD605N] Except for when noise cancelling is turned ON.)
®
device
)] of this unit for approx. 3 seconds until the power/pairing LED (blue) blinks.
8)
l
Preparation
9
®
device for
Advertisement
Table of Contents
