Table of Contents
Advertisement
Making a phone call
®
With Bluetooth
enabled phones (cell phones or smartphones) that support the "HSP" or "HFP" Bluetooth
profile, you can use the unit for phone calls.
• HSP (Headset Profile):
This profile can be used to receive monaural sounds and establish two-way communication using the
microphone on the unit.
• HFP (Hands-Free Profile):
In addition to the HSP functions, this profile has the incoming and outgoing calls function.
(This unit does not have a function that allows you to make phone calls independently of a Bluetooth
phone.)
1
Connect the Bluetooth
2
Press [Multiple functions button] on the unit and answer the incoming call.
• During an incoming call, ringtone will sound from the unit and the power/pairing LED will blink.
• (HFP only) To reject the incoming call, press [Multiple functions button] twice quickly.
3
Start talking.
• The power/pairing LED will repeatedly blink 2 times during a call.
• The volume can be adjusted during a phone call. For setting instructions, see page 10.
4
Press [Multiple functions button] to end the phone call.
• A beep will sound.
Note
• There may be instances when hands free setting needs to be done on the Bluetooth
• Depending on the Bluetooth
the unit.
• (HFP only) It may be difficult to hear phone conversations when the unit is used in locations with loud ambient noise
or in outdoor or other locations exposed to powerful winds. In that case, change the calling location or switch the
calling device to the Bluetooth
quickly to switch.)
• You can have the Bluetooth
®
Bluetooth
enabled phone. (
®
device and the unit. (
®
enabled phone, you may hear incoming and outgoing call ringtones of the phone from
®
enabled phone to continue the call. (Press [Multiple functions button] on the unit twice
®
enabled phone make phone calls by using the microphone of the unit and an app of the
l
13, "Activating a voice functions")
Operation
8, "Connecting a Bluetooth
l
11
®
®
device")
®
enabled phone.
®
enabled
Advertisement
Table of Contents
