En13 - Panasonic NC-K101 Operating Instructions Manual

Power base
Wipe with a well - wrung cloth.
To store
• Dry it thoroughly.
• Put in a plastic bag and seal the bag to prevent insects etc. from entering.
Troubleshooting
Please check the following points before arranging for service.
Problem
Power switch does
not turn on.
Water does not boil.
20210910 NC-K101_301 英＋繁.indd 13 20210910 NC-K101_301 英＋繁.indd 13
Cause
●Is the power plug
disconnected?
●Is the body set correctly
on the power base?
●Is there a piece of metal
or foreign material
adhered to the power
base connector or
body connector?
●Once the machine has boiled, the power switch is
automatically turned off and cannot be turned on for
approximately 3 minutes.
●Did you try to turn on the
power switch without
water in the machine?
)
The boil dry protection
will work to turn off the
power switch.
●Is the power switch
turned off?
Power base
connector
and Action
● Insert the power plug
into outlet firmly. (P . EN10)
●Ensure the body is set
correctly.
●Remove the piece
of metal or foreign
material. (P. EN 12 – 13)
●Fill with water and turn
)
on the power switch.
(P. EN10)
●Press to " ", and turn
on the power switch.
(P. EN11)

EN13

2021/9/10 12:10:30 2021/9/10 12:10:30