Shindaiwa SL433IDG Owner's And Operator's Manual
  1. Manuals
  2. Brands
  3. Shindaiwa Manuals
  4. Lighting Equipment
  5. SL433IDG
  6. Owner's and operator's manual
Shindaiwa SL433IDG Owner's And Operator's Manual

Shindaiwa SL433IDG Owner's And Operator's Manual

Tower light
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
'
OWNER
S AND OPERATOR
Tower Light
SL433IDG
CAUTION
Do not operate the Tower Light, or any other appliance, before you have read and
understood the instructions for use and keep near for ready use.
'
S MANUAL
SL433IDG-A/S1W
X753-006 63 0
X753809-0601

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL433IDG and is the answer not in the manual?

Questions and answers

Related Manuals for Shindaiwa SL433IDG

Summary of Contents for Shindaiwa SL433IDG

  • Page 1 ’ OWNER S AND OPERATOR S MANUAL Tower Light SL433IDG CAUTION Do not operate the Tower Light, or any other appliance, before you have read and understood the instructions for use and keep near for ready use. SL433IDG-A/S1W X753-006 63 0...
  • Page 3 Introduction Thank you for purchasing this Shindaiwa Tower Light.  This manual has been created to ensure safe usage of this tower light. Be sure to read this manual before operation. Improper operation/handling of this tower light will result in an accident or malfunction.

  • Page 4: Table Of Contents

    Table of Contents Safety Precautions ······················································· 2 Specifications ····························································· 4 Applications ································································ 5 Part Names ································································· 5 Operating Procedures ·················································· 6 5-1. Operating the Dolly Handle ····································· 6 5-2. Applying the Wheel Brakes ····································· 6 5-3. Using the Outriggers ·············································· 7 5-4.

  • Page 5: Safety Precautions

    1. Safety Precautions WARNING: TIPPING OVER  Lower the mast if using in strong wind that causes the lamp fittings to sway severely.  Although the mast can withstand wind speeds up to 20 m/s when the mast is １． completely extended, do not use in wind speeds over 15 m/s (such as when power lines are swaying or it is difficult to open an umbrella) in order to provide safety by preventing the lamps from tipping over.
  • Page 6 CAUTION: BURNS  Do not touch the lamps, lamp fittings or ballast when the lamps are lit up or immediately after being turned off because they are extremely hot.  Wear work gloves if it is absolutely necessary to touch a lamp fitting when it is hot. CAUTION: ELECTRIC SHOCK ...

  • Page 7: Specifications

    2. Specifications Model SL433IDG-A Specifications 4-Lamp Type Rated Voltage (V) ２． Rated Frequency (Hz) Rated Consumed Power (W) 1,740 Rated Consumed Power of Compatible 400 x 4 Lights (W) Dry Weight of Tower Light Set (kg) Type Metal halide lamp...

  • Page 8: Applications

    3. Applications  Various lighting applications ３． 4. Part Names ４． Lamp Fitting Lamp Fittings Securing Nut of Angle Adjustment Frame Lamp Fitting Leg Lever Lamp Fitting Leg Rotation Handle Lamp Fittings Mast Handle Lifting Lug Pulley Cover Generator Dolly Handle Winch Winch Handle Ballast...

  • Page 9: Operating Procedures

    5. Operating Procedures 5-1. Operating the Dolly Handle Dolly Handle Turn the handle to the right to turn the front wheels to the right and turn to the left to turn the front ５． wheels to the left. <Note>  Be sure to always use the dolly tow hook if towing or pulling this tower light such as if the wheels are stuck in sand.

  • Page 10: Using The Outriggers

    5-3. Using the Outriggers WARNING: TIPPING OVER/INJURY  Be careful of the outriggers when they are in use. You could trip and fall. CAUTION: INJURY  Be sure to always support the outriggers with one hand when setting and storing them. ...

  • Page 11: Using The Lamp Fittings And Lamp Fittings Frame

    5-4. Using the Lamp Fittings and Lamp Fittings Frame WARNING: ELECTRIC SHOCK  Do not touch this tower light during operation if it or your body is wet. CAUTION: INJURY/BURNS  To change the direction of a lamp fittings frame, be sure to always support the lamp fittings frame or leg with one hand while loosening the rotation handle.
  • Page 12 If changing one lamp fitting Loosen the angle adjustment lever. Position the lamp fitting in the desired direction and tighten the angle adjustment lever. Lamp Fitting Lamp Fitting Angle Adjustment Angle Lever Tighten Adjustment Loosen Lever (3) Storing the Lamp Fittings for Movement or Transport Position the lamp fittings so they face forward and Lamp Fittings tighten the rotation handle to secure them.

  • Page 13: Lifting/Lowering The Mast

    5-5. Lifting/Lowering the Mast CAUTION: INJURY  Do not touch the mast, winch drum or wire when the mast is moving up/down. <Note>  Depletion of the grease of the ring key on the surface on the winch drum side reduces the service life of the winch.

  • Page 14: Operating Procedures (Tower Light)

    6. Operating Procedures (Tower Light) WARNING: TIPPING OVER  Lower the mast if using in strong wind that causes the lamp fittings to sway ６． severely.  Although the mast can withstand wind speeds up to 20 m/s when the mast is completely extended, do not use in wind speeds over 15 m/s (such as when power lines are swaying or it is difficult to open an umbrella) in order to provide safety by preventing the lamps from tipping over.

  • Page 15: Turning Off The Lamps

    Turn the generator Output switch to "ON" to turn on the lamps. <Note>  The lamps require approximately 10 to 15 minutes after lighting up to become completely stable. Raise the mast and adjust the lamp fittings to the desired height. (Refer to "5-5. Lifting/Lowering the Mast".) 6-2.

  • Page 16: Transport Procedures (Moving/Loading On A Vehicle)

    7. Transport Procedures (Moving/Loading on a Vehicle) WARNING: TIPPING OVER  Always be sure to lower the mast to the lowest position when moving or transporting loaded on a vehicle. ７．  When loaded on a vehicle, set so that the generator side is facing towards the direction of travel (mast is in the back).
  • Page 17 <Note>  Always be sure to insert the forks so that they are inserted into the indicated fork guides. Failure to insert the forks into the guides can result in damage to the tower light generator, or cause the equipment to become unbalanced and fall off while transporting. Generator Forks Fork Position...

  • Page 18: Lamp Replacement Procedures

    8. Lamp Replacement Procedures WARNING: ELECTRIC SHOCK  Do not touch this tower light during operation if it or your body is wet.  Be sure to always stop the engine before performing any check or maintenance of the lamps and other parts. CAUTION: INJURY/BURNS ...

  • Page 19: Generator Loading/Unloading Procedures

    9. Generator Loading/Unloading Procedures WARNING: DROPPING/INJURY  Securely tighten the bolts and nuts securing the generator when loading a generator that has been removed from a dolly. ８． Unload the generator according to the following procedures when using the generator alone. Load by performing the procedures in the reverse order.

  • Page 20: Inspection/Maintenance

    10. Inspection/Maintenance WARNING: ELECTRIC  Be sure to always stop the engine before performing any check or SHOCK maintenance of the lamps and other parts. ９． CAUTION: BURNS  Do not touch the lamps, lamp fittings or ballast when the lamps are lit up or immediately after being turned off because they are extremely hot.
  • Page 21 Every 100 Every 200 Location Check for Pre-Operation Action hours hours Apply Moly HD  Outriggers Movement Grease Apply Moly HD  Outrigger Lever Movement Grease  Handle Fixing Bolts Looseness Tighten Apply Moly HD  Brake Pedal Movement Grease Adjust the stopper ...
  • Page 22 (2) Applying Grease to Pulleys Bolts (2) Mast 1st Stage Remove the two bolts and bolt/nut assembly securing the pulley cover. Pulley Cover Bolt/Nut Use a spatula or similar tool to apply the grease specified in this manual (Moly HD Grease) to the moving parts of the upper pulley.

  • Page 23: Long-Term Storage

    11. Long-Term Storage WARNING: ELECTRIC SHOCK  Be sure to always stop the engine before performing any check or maintenance of the lamps and other parts. １０． CAUTION: BURNS  Do not touch the lamps, lamp fittings or ballast when the lamps are lit up or immediately after being turned off because they are extremely hot.

  • Page 24: Troubleshooting

    12. Troubleshooting WARNING: ELECTRIC SHOCK  Do not touch this tower light during operation if it or your body is wet. １１．  Be sure to always stop the engine before performing any check or maintenance of the lamps and other parts. CAUTION: BURNS ...
  • Page 25 MEMO...
  • Page 26 MEMO...
  • Page 27 MEMO...
  • Page 28 ©2017...

Table of Contents