The Control Panel; Changing A Programme - Sharp QW-S41I472X-EU User Manual

. THE CONTROL PANEL

1
Press the Power On/Off button (1). The End
Of Programme Indicator (7) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button (3). The Programme Display shows
the time of the selected programme and
the remaining time of a programme in
operation.
Additional functions can also be selected.
NOTE: Press the Half Load button
(6) to select which area of the dishwasher
contains items for washing. Press the
button until the light corresponding to the
basket contaning dishes to be washed
illuminates. If a feature is selected
that is incompatible with the Half Load
programme, a buzzer will sound.
NOTE: Press the Tablet Detergent
button (5) when combined detergents are
used, including salt and rinse aid.
NOTE: If an extra feature (6) has been
used on the most recent wash programme,
this feature will remain active on the next
programme selected. To cancel this feature
on the newly selected programme, press
the feature button until the light on the
button switches off.
NOTE: If you decide not to start the
machine after selecting a programme,
press the Power On/Off button (1). Your
machine will be ready for a new programme
selection when the Power On/Off button is
pressed again. A new programme can be
selected using the Programme Selection
button.
NOTE: If you decide not to start the
selected programme, please see the
"Changing a Programme" and "Cancelling a
Programme" sections.
InfoLED function, the InfoLED light will
illuminate when in operation. When the
programme is complete, the InfoLED will
switch off.
2 3 4 5 6 7
dishwasher salt, the Salt Lack Warning
Indicator (7) will illuminate to indicate the
salt chamber needs filling.
aid, the Rinse Aid Lack Warning Indicator
(7) will illuminate to indicate the rinse aid
chamber needs filling.
Delaying the Programme
Press the Delay button (4) to delay the start
time of a programme by 1 hour up to 19
hours. Pressing the button once delays the
start time by 1 hour, and continuing to press
the button will increase the delay time.
The programme can be selected first and
the delay time after, or vice versa. Press
the Delay button to cancel or change the
delayed start time.

7.1. Changing a Programme

Follow the steps below if you would like to
change the programme while in operation.
avoid water spillage if you wish to stop the
wash programme before it is complete.
EN - 16
NOTE: For dishwashers with an
NOTE: When there is not enough
NOTE: When there is not enough rinse
Open the door and select a new
programme using the Programme
Selection button.
After closing the door , the new
programme will resume the
course of the old programme.
NOTE: Open the door slightly at first to