Safco DEFY Instructions

Up Button

INITIALIZATION:

Follow the below steps before using your desk.
1. Press and hold Down Button until RST appears on the display
2. Desk will go to the lowest position, then rise slightly and stop
3. Release the Down Button
4. Desk is ready to use

PROGRAM POSITION PRESETS:

1. Use Up and Down Buttons to move desk to your desired position
2. Press SETTING button and one of the four Preset Position buttons simultaneously
3. Repeat for all preset buttons, up to four
4. Panel displays 1CF, 2CF, 3CF and 4CF for each reset when set

UP/DOWN BUTTON:

Press the UP Button, the legs will move up; Press Down Button, the legs will move down;
release to stop movement.
For more information on this product please visit safcoproducts.com.
Down
Button
D E F Y ™ H E I G H T -
A D J U S T A B L E D E S K
PROGRAMMABLE PRESET INSTRUCTIONS
4 Preset
Setting
Position
Button
Buttons
SEE MORE ON BACK
©2018 Safco . All rights reserved.
®