Advertisement
BATTERY RECOMMANDATION
One pack of 11.1V 1300mAh 35C Lipo battery (Not included)
kits bag)
CHARGER RECOMMANDATION
2S/3S Balance Charger and adapter, or multi-functional intelligent charger (Not included)
INSTALLING TRANSMITTER BATTERIES
NOTE: The transmitter is not water resistant and should never come in contact with water.
1. Install four fresh "AA" batteries. Follow the diagram located in the bottom of the battery tray
for proper battery orientation
2. Turn the transmitter "ON" The battery light should glow bright RED
4XAA Batteries
(Not Included)
INSTALLING THE 11.1V LIPO IN THE MAD SHARK
1. Switch on transmitter power, the light glows bright red.
2. firstly rotate the plastic lock underneath the boat head, then rotate the four plastic lock at the hatch
as photo show to remove the hatch.
Mad Shark V2 2.4GHz ARTR Brushless Mini F1 Speed Boat
2
Advertisement
