Tripp Lite DMR1015X3 Owner's Manual page 4

1a. Wood Stud Wall Mounting
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
16-11-187-933680.indb 4
Washer
Anchor Bolt
WARNING
30mm
(1.2")
1
4
ø 3mm
(ø 0.12")
2
Find and mark the exact
location of mounting holes.
3
Drill pilot holes.
Screw the wall
plate onto the
wall.
12/15/2016 10:24:57 AM