Preparing A New Machine (Petrol Version); Start-Up (Petrol Version) - Kruger KB650 GT Use And Maintenance Manual

PREPARING A NEW MACHINE
2
6
4
5
PETROL VERSION
Let us now consider the machine in the
gasoline-fed engine version:
1
Open the plug (1).
Fill the tank (2) with unleaded petrol (3).
Lift the guard (4) and check the oil lever in
the motor (5) and if it's not enough, top it up.
Please read the use manual of the Honda
3
engine.
Now the machine is ready to be used.
Before opening the central upper
switch off the machine using the
key and remove it from the control
START-UP
N.B.: Please read the Honda engine
Turn gasoline cock (6) to "ON/OPEN" to
enable the flow to the carburetor
WARNING:
door to carry out possible
operations inside the machine,
board.
instructions manual
41
KB 650/850 GT-ET