Casio SE-S400 Service Manual page 6

(6) When INIT Code setting is complete, the display below appears and the result is printed out.
[DEPT Setting
[PLU Setting
[Key Setting
[Date Setting
[Clerk Setting
[Message Setting
[POP Setting
[Tax Setting
Select & <CA/AMT TEND>
Clearing a machine lock up
If you make a mistake in operation, the cash register may lock up to avoid damage to programs and
preset data.
Should it happens, you can use the following procedure to clear the lock up without losing any data.
(1) Plug the power cord to a power outlet with the Mode Switch OFF.
(2) While holding down the key, turn the Mode Switch to [PGM].
NOTE: The key to press varies according to the model. See below.
One-printer model
Two-printer model
(3) When "INIT" or "FC" appears on Main Display, release the key.
(4) Press s .
NOTE: The receipt is issued.
SE-S400/SE-S800/PCR-T500/PCR-T520/SE-C450
SE-S3000/SE-S900/PCR-T2300/PCR-T2400/SE-C3500
[Printout of the Result]
]
]
]
]
]
]
]
]
[FEED]
[RECEIPT FEED]
– 4 –